Dimmer Pack

Powerlight 1212D is a 12-channel digital dimmer (12A), mounted in a sturdy metal 3U rack container.

All the controls and settings are accessible by means of the buttons on the front panel and can be monitored on the built-in display.

The on-board microcomputer controls a comprehensive series of functions (soft patch, channel mode, channel level, pre-heat, equalization curves, etc.).
Powerlight 1212D was designed paying great attention to reliability and adopts avant-garde
technical solutions, including internal self-diagnosis, forced ventilation with air flow proportional to the temperature and output protection with a thermal magnetic circuit-breaker on each channel.

Powerlight 1212D can also be used without an external controller: in fact, it's possible to program 4 different chases with a maximum of 32 steps each.
On-board software can be upgraded via RS-232.

Powerlight 1212D is available with a choice of 5 different connector panels: ILME 24, ILME 16, Cabur, Socapex and Powercon.



12-channel digital dimmer, 12A per channel
Thermal magnetic circuit-breaker fo each channel
7 equalization curves per channel
4 Programmable chases
Switch-on with recoll of previous status
Filter ramp time (peak to peak) 250 micro sec
Software upgrade via RS 232

DMX In and link-thru connectors
Automatic frequency selection (50/60 Hz)
110-220V single phase 50/60Hz power supply
380V three phase 50/60hz power supply
Forced air ventilation (Variable)
Overheating protection
Phase connection control
Self-testing with indication of any irregularities
Updatable with programming kit.

(HxWxD) 13.3 x 44.2 x 40 cm
Weight: 18Kg 
SGM Light A/S · Sommervej 23 · 8210 Aarhus V · Denmark · Phone: +45 70 20 74 00 · E·mail: info@sgmlight.com