Moving Head Wash

In Wash configuration, the Giotto 1500 MKII features two modules: "CMY" (CMY colour mixing system, linear CTO filter and Dimmer) and the dedicated “Wash" module, with all the features that enable the fixture to emit diffused, soft even light.

The various functions include a twin-blade built-in beam shaper, which sculpts the light projected on to specific zones of the set or scene, a field diaphragm and the possibility of adjusting the soft edge of the beam shaper and the field diaphragm.

The Zoom lenses enable to adjust beam aperture from 6° to 40°, whereas the Frost lens makes it perfectly even.

Three dedicated lenses are available for the fixture in Wash configuration: The Fresnel Lens enables to obtain a beam for even colouring, the Anti-halo PC Lens gives a very narrow intense beam with a limited soft edge field and the Super Wide Lens gives a very wide even beam aperture.


Pan/Tilt 530°/250° 8/16 bit
Automatic Pan/Tilt repositioning

Luminous source
Philips MSR GOLD 1200 FastFit - adjustable from 900W to 1400W (6.300°k)
- Philips MSR Gold 1500 FastFit (6.400°k)
- Osram HTI 1500W /60/P50 Lok-it! (6000°k)
Average lamp lifetime 750 hr.
Fast restrike
Remote lamp on/off via DMX.
Lamp power reduction in the event of overheating
Lamp elapsed time and strike counter

Faceted reflector
Fresnel front lens - Wash Configuration
Anti-halo PC front lens - Wash configuration
Super wide front lens - Wash Configuration

Dynamic Effects
Advanced CMY colour mixing
Linear CTO filter
Linear dimmer

Electrical Specifications
Power supply with PFC (universal 90/245V 50/60Hz); protected against 400V
Electronic Ballast.
Max consumption: 2,000 W
Automatic energy saving in the event of blackout use

Programming and Control
DMX 512 or RS 232 input signal
35 DMX channels - Spot configuration
Ethernet interface (ART-NET protocol)
W-DMX interface fitted as standard
RDM protocol implemented on DMX (monitoring of internal parameters)
Settings via on-board microcomputer viewable on display (even with fixture off)
Display “flip” function (rotates through 180°)
Adjustable display brightness
Fixture elapsed time indicator
On-board temperature sensors (base, power, one for each module)
Total fixture software update via DMX
Graphic display (128 x 64)

79 x 48 x 55cm
Weight: 45 Kg
SGM Light A/S · Sommervej 23 · 8210 Aarhus V · Denmark · Phone: +45 70 20 74 00 · E·mail: