SGM RDM tool for TLD-612

The SGM TLD RDM tool is a small utility application to modify settings for the SGM TLD-612 Touring Pixel Driver using an SGM firmware tool USB cable for RDM connection.

The application allows users to modify TLD-612 DMX start address, DMX mode and switching status LED on and off.
Please note that although the application uses a sub-set of standard RDM commands to communicate with the TLD-612, it does not conform strictly to RDM standards and is not intended as a general RDM tool for other fixtures.





• Windows XP or newer, 32- or 64-bit versions are supported.
• SGM firmware tool USB cable (SGM part # 40500201).
• TLD-612 firmware version 1.10 or higher.


SGM Light A/S · Sommervej 23 · 8210 Aarhus V · Denmark · Phone: +45 70 20 74 00 · E·mail: