TLD-612

Touring LED Driver

This Touring LED Driver has specifically been designed for controlling SGM’s LB100 LED Balls and LT100/LT200 Graphic Tubes.

The Driver’s six outputs can control up to 6 x 8-metre lengths of LED strings and 1m or 2m graphic tube per output (respectively containing 27 pixels and 54 pixels).

Maximum total power consumption is 360W and each LED pixel uses 3 DMX channels for RGB: the #1 pixel (1.1 DMX output) uses channel 1, 2 and 3, #2 pixel uses 4, 5 and 6, etc.

 
Download Fixture Profiles

Specifications

Features
Controller designed for LED Ball and 3D Graphic Tube setup
6 output can drive up to 6x8 meter LED Balls and 1 or 2 m 3D Graphic Tubes per output

Connections
DMX Data input locking 5-pin XLR male sockets
Driver Data output locking 4-pin RJ765 sockets

Electrical Specifications
AC 85 – 264V, 50/60Hz
Maximum total power consumption 360W
Power consumption without load 14W

Programming and Control
Each LED pixel uses 3 DMX channels for RGB. The #1 pixel (1.1 DMX output) uses channel 1, 2 and 3, #2 pixel uses 4, 5 and 6, etc.

Dimensions
(LxWxH): 715 x 80 x 182mm
Weight: 4Kg

Accessories
LB-100, LED Balls - 1 meter string containing 7 balls
LT-100, 3D Graphic Tube 1m (27 pixels)
LT-200, 3D Graphic Tube 2m (54 pixels)
SGM Light A/S · Sommervej 23 · 8210 Aarhus V · Denmark · Phone: +45 70 20 74 00 · E·mail: info@sgmlight.com