VP Power + Data Joiner

Item no. 83062046

Info shortcuts

Intended to join power and data in one single VP cable
Waterproof / Dustproof

The VP Power + Data Joiner is designed to join power and data for a daisy chain of VP fixtures. One VP Power + Data Joiner can send power and data to no less than 65 VPL 1220-20 units.

The VP Power + Data Joiner is a waterproof / dustproof connection box with a VP female chassis connector, a power cable with bare ends, and a RJ45 chassis connector. This item must be installed before the first VP fixture in the cabled string and before the circuit breaker (for power) and VP Processor (for data). SGM always recommends to install a 10amp type B circuit breaker for each string of cabled VPL luminaires.

Specification

Physical
Net dimensions L x H x W	104 x 55 x 78 mm
Net dimensions L x H x W (inches)	4.1 x 2.2 x 3.1 inches
Electrical
Input voltage, nominal	200 - 240 VAC; 50 / 60 Hz
Connections
Data / Power input	RJ45 connector IP67
Data / Power output	8 pin X-Lok connector IP68
Power	Power cable 1 meter with bare ends (permanently wired)
Thermal
Temperature range, operating	-20°C to 60°C
Temperature range, operating max	60 °C
Temperature range, operating min	-20 °C
Temperature range, start-up	-20°C to 60°C
Temperature range, storage	-40°C to 80°C