Standard

G·Spot

LED Moving Head

Housing colors
Black RAL 9004
White RAL 9010
Custom any RAL
Info shortcuts
  • High-power IP65 RGB LED light source
  • 15327 lumen and 8° to 43° zoom range
  • 2 rotatory gobo wheels, FX wheel, 4-facet prism and ultra-high-speed strobe
  • DMX, RDM and wireless control
  • 2000K - 10000K CTC control, no hotspots
  • Linear frost and smooth iris feature
  • Silent performance
  • Flicker-free / Programmable scenes

The G-Spot is a RGB LED moving head with IP65-rating and a bright color output. It is capable of an even field beam projection with sharp imaging and no color aberrations. The integrated dehumidifier of the G-Spot ensures perfect inner cleanness of the luminaire and no accumulation of dust or externally induced impact on internal optics, gobos or the light source unit. Due to the revolutionary product features, the G-Spot won the prestigious top industry PLASA Award for Innovation, 2013.

 

 

LED Technology
This tough and reliable LED luminaire includes a powerful W RGB LED engine capable of deep saturates and smooth color transitions. Because of its impressive blue and red output, the G-Spot is able to generate color palettes with warm pale hues and bright cold tones, but also outstanding magentas and cyans. LEDs expected lifetime is 50,000 hours.


Colors

The G-Spot is one of the brightest and most accurate luminaires ever made in terms of color output. It was designed to match all the colors present in the SGM range, but also to impact the audience with a calibrated white available in all color temperatures from 2000K - 10000K. When it comes to solid colors, the G-Spot outperforms any discharge lamp with CMY color mixing, no matter the wattage.


Optics

With an 8° to 43°º zoom range, plus an additional pseudo zoom down to 1º, the G-Spot is ready for any stage or event. Being water, dirt and sand proof, the internal optics are always clean to get the maximum brightness from the light source. Worst case scenario, the front lens must merely be wiped off, which is a huge time and cost saver effectively eliminating the need for cleaning.


Optional Framing module
By replacing the supplied G-Spot module with an optional G-Profile module, it is possible to expand the capabilities of the G-Spot by adding a framing system with 4 blades and +/- 45º rotation. After the change, the unit only needs a firmware update to transform it into a G-Profile.


IP rating

The durable IP65-rating of the G-Spot luminaire ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated.


Dehumidification

The internal built-in dehumidifier protects this fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks. Learn more about dehumidification


Photometrics

The G-Spot delivers a staggering lumen output not only in white but also in color. It is able to achieve 4663 lumen in red, 3571 lumen in green and 1446 lumen in blue. These high values convert the G-Spot into the perfect companion not only in medium-sized venues but also in large-scale tours with high audience numbers.

Sharp gobo projection
One of the big benefits of the G-Spot is its sharp and detailed gobo projection, with no color aberration in the borders or hotspots in the centre of the beam. The G-Spot uses glass gobos not affected by the heat, so the pattern is always fully focused. Since RGB colors in the G-Spot are bright and contrasted, it is possible for the user to combine them with the gobos without losing much output.


Thermal management

To achieve optimum performance of the LEDs at all times, this bright and accurate luminaire is optimized to manage heat impact through SGM's unique thermal management technology. The technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. Additionally, the special aluminum alloy and surface treatment ensures maximum heat dispersion while the fan-assisted cooling ensures optimal performance at any time and under any conditions (such as variable temperatures, limited airflows, confined installation spaces, etc.).
Like all SGM LED products, the G-Spot consists of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters. Learn more about SGM thermal management


Mounting options

The G-Spot can be rigged with the included easy-fit omega brackets with ¼ turn fasteners, using two of the four locking points. Installation time can be saved onsite as the fixtures can be pre-rigged to HUD truss making the rig fly-ready when reaching the venue. Handles can be found in the base as well to help users mount the fixture.

 

Included SGM technologies

Thermal
DriveTM
This thermal management techonology provides Advaced Temperature Control monitored via sensors and software, keeping optimal LED junction temperatures, and ensuring maximum reliability for long-term use. The ThermalDriveTM system includes cutting-edge heat removal via passive thermal tecniques and active forced-air cooling (depending on the product), specifically designed to maintain LED efficiency while extending fixture's lifetime.

TruColorTM
SGM uses Full Range Calibration in all LED fixtures over CIE space and black body curve, measured via spectrometer and SGM Illumination Lab software. To provide the best user experience, SGM's Color Match procedure ensures accurate wavelength reproduction within the product range via colored LEDs, dichroic filters, or CMY mixing (depending on the product); all of them specified to match the SGM color palette.


DryTechTM
SGM's integrated patented Dehumidification process eliminates humidity and breaks down corrosive molecules deriving from polluted air to avoid destructive corrosion. Inbuilt dehumidifiers constantly remove trapped hydrogen from inside of the lighting fixture in a solid estate electrolytic process with no moving parts. The DryTechTM procedure is also based on a Ingress Protection rating of 65 or 66 (depending on the fixture), intended as a full protection against dust and other particles, while ensuring protection against direct water jets.

Specification

Optical Data
Focus Motorized
Frost 0% - 100%, variable
LED expected lifetime 50,000 hours
Lens diameter 125 mm
Lightsource High-power RGB LED
Prism 4-facet rotating prism
Pseudo zoom range 1° to 43°
Zoom Motorized
Zoom range 8° to 43°
Photometric
Color temperature range 2000K - 10000K
Efficacy 16 lm/W
Light output all LEDs on 15327 lm
Light output blue 1446 lm
Light output green 3571 lm
Light output red 4663 lm
Lux @ 10m 5529 lux
Lux @ 3m 61437 lux
Lux @ 5m 22117 lux
Maximum beam angle 42 °
Maximum field angle 44 °
Minimum beam Angle 9 °
Minimum field angle 11 °
Physical
Color options Black - RAL 9004
Custom color - Any RAL
White - RAL 9010
IP class IP65
Lens material AR-coated glass
Material Aluminium
Plastic PA6.6
Stainless Steel
Net dimensions 470 x 805 x 492 mm
Net dimensions inches 18.5 x 31.7 x 19.4 inches
Net max height 821 mm
Net weight 52 kg (114.7 lbs)
Features
Color calibration SGM proprietary, full color calibration
Dehumidifier Base / Head
Dimming Smooth fade in, gamma corrected curve
Effect wheels Continuous rotation with variable speed and direction
Gobo wheel (1) 5 rotatable, indexable, and interchangeable gobos + open
Gobo wheel (2) 5 rotatable, indexable, and interchangeable gobos + open
Iris 1% - 100%, pulse effect
Other LED frequency control over DMX
Pan 540°
Strobe Ultra-high-speed strobe effects
Tilt 270°
Electrical
Electrical protection Overload protection
Input voltage, absolute max. rating 190 - 264 VAC; 50 / 60 Hz
Input voltage, nominal 208 - 240 VAC; 50 / 60 Hz
Main fuse T12A - 250V
Max inrush current 230VAC 30 A
Max power consumption 1150 W
Power factor 0.97 PF (230 V)
Power Supply Unit Auto-ranging electronic switch-mode
Standby power consumption 70 W
Programming and Control
16-bit control Dimmer, colors, pan/tilt, gobo index/rotation, zoom, focus
Cabled DMX 5 pin XLR input/output
DMX channels 24 or 30
DMX modes 2
Protocol USITT DMX512A
Wireless DMX (LumenRadio)
RDM ANSI E1.20
Setting and addressing Control panel
OLED graphical display / 4 buttons
RDM ANSI E1.20
RFID
Standalone mode Up to 24 programmable scenes
Wireless DMX Lumen Radio with RDM
Connections
DMX data in/out IP65 XLR 5-pin cable, 0,2 m (7.8 in)
Power Power input connector
Installation
Mounting point 4 x 2 quarter-turn locking points
Orientation Any
Rigging possibilities Hanging (Omega Brackets included)
Safety features 2 attachment points for safety wire
Minimum distance to combustible materials: 0.3 meter (11 in).
Thermal
Cooling Active, Forced Air, Temperature-regulated
Humidity (max.) 98 %
Temperature range, operating -40°C to 50°C
Temperature range, start-up -20°C to 50°C
Temperature range, storage -40°C to 80°C
Thermal protection Automatic overtemperature protection
Total heat dissipation, max power 3923.8 BTU per hour
Total heat dissipation, standby 238.8 BTU per hour
Included items
Included items 2 Omega bracket with quater-turn fasteners
2 m IP66 power cable pigtail
Safety instructions and installation quick guide
Gobos
Glass Borosilicate high-temperature glass
Image diameter 30 mm
Maximum thickness glass 3.5 mm colored glass or textured gobos
Maximum thickness metal 1.1 mm black & white
Metal Not Recommended
Outside diameter 37.5 mm
Conforms To
CE - 2014/30/EU: EMC Directive EN 55103-1
EN 55103-2
EN 61000-3-2
EN 61000-3-3
CE - 2014/35/EU: Low Voltage Directive EN 60598-1
EN 60598-2-17
EN 62471
EN 60529
RoHS2 Directive 2011/65/EU
UL UL Std. 1573
Certified To
CSA CSA E60598-1, Ed: 2
CSA-E598-2-17-98, Ed: 1

Download

Certifications & classifications

SGM LIGHT
SGM LIGHT
SGM LIGHT
SGM LIGHT
SGM LIGHT

Ordering information

Product name Item number
G-Spot Moving Head, Std, BL 80021002
G-Spot Moving Head, WH 80021005
G-Spot Moving Head, Std, CU 80021009
Accessories Item number
G·Profile Module 83061405
Omega Bracket with 1/4-turn fasteners 83060602
Single Flight Case for G·Spot series 82051508
Power cable with IP connector 07860275
SGM USB uploader cable 83062011
Vacuum Test Kit 83061136
A·4 80070217
RDM Addressing Tool

Related products

See more Moving Heads

View all

Let's work together!

We have lighting experts all around the world

Explore the SGM network

Stage Lighting

Experience the SGM lighting technology 

SGM Light is specialized in stage lighting you can trust, by developing best in class stage luminaires with an optimal return on investment. Our technology focuses on flexibility, efficiency, and versatility, building tools for an industry where high quality, reliability, and innovation are some of the most important features. At SGM, we thrive to push the limits within the world of stage lighting to create the solutions that artists, lighting designers, rental companies and audiences are really looking for. 

 

Explore the different SGM luminaires for the entertainment industry 

Our extensive range of entertainment lighting include products such as moving heads, washes, strobes, blinders, flood lights, and effect lighting. This multi-purpose wide range of SGM luminaires is designed to tailor the lighting setup up to your needs, from high-output beams to high-CRI and high-TLCI fixtures. SGM Light is represented in many countries worldwide, and our products are used globally at all types of stage events and venues, including concerts, theatre productions, films, exhibitions, theme parks, and art installations.

Since 2010, all SGM LED products are powered by our proprietary TruColor™ algorithms, ensuring an homogeneous color mixing performance across the entire portfolio, while offering full compatibility between SGM’s RGB-based fixtures and filter-based White LED fixtures.
 

Our unique development process 

All SGM stage lights undergo rigorous testing and development, ensuring top-of-the-line LED fixtures that provide superior performance. We implement high quality standards for light output, color consistency, thermal management, and weatherproof resistance, to guarantee an extreme durability, excellent performance, and almost no maintenance. This way we can increase the ROI of SGM users, while offering a powerful all-weather lighting portfolio.

A great example of this is the SGM G-7 Spot LED Moving Head, with IP-66 rating and active dehumidification. It is extremely durable in all sorts of conditions, with electronics and optics protected by SGM’s exclusive DryTech™ system and a robust design. Our advanced technology ensures the interior of the fixture is preserved from external elements like water, dust, dirt, mud, sand, airborne pollution, extreme temperatures, and humidity, all of them very common at events or music festivals. Even though the G-7 Spot is perfect for touring and other outdoor events, these unique features also make it suitable for indoor installations and events, where long lifespan and low maintenance are must-haves.
 

Ultimate stage light testing

To be able to guarantee the durability and the best performance possible, all SGM stage lights are pushed to the limits in different ways. We lock up the fixtures in a salt chamber, we sandblast the lenses, we apply high-pressure washers over them, and we test them in very high and low temperatures. Sometimes, we even encase the fixtures in a block of ice before smashing it with a sledgehammer. It is literally a torture, but we are really focused on building fixtures that rental companies can rely on.

Products such as the SGM P-6 LED Wash or the SGM Q-8 DualSource™ LED Strobe Flood, are specifically designed and tested for continued rental use in all-weather environments. These rock-solid IP66 rated fixtures include an integrated dehumidifier, a sealed IP67 wet base, and our next-gen ThermalDrive™ cooling system. This is the result of 10+ years of experience in weatherproof and long-lasting LED technology.
 

Professional support and continuous improvement

At SGM 24/7 technical support is key when it comes to all our partners. We know the importance of a fast and efficient after-sales service, and we believe your feedback makes us better; that is why we see technical support as our top priority. Supporting our users is always a great chance to learn from them. Based on these inputs, we deliver continued firmware improvements to your existing SGM fixtures, so they can keep their value over the years. SGM is always ready to listen, so please tell us what you need; we will evaluate all engineering possibilities for enhancing and optimizing the performance of our products.
 

Be inspired by SGM stage lighting solutions

For inspiration on what our different lighting solutions can be used for, please visit our Project page, where you can read about previous light shows and installations featuring our bright and powerful fixtures.
 

Learn more about our different stage lighting product series

You can learn more about our different types of stage lighting luminaires under each product page. Here you will find detailed product specifications, allowing you to easily choose the perfect LED solution to wow your audience.