i·2 White POI

Construction
The i-2 White POI is an ultra-compact form-follows-function Danish designed luminaire that blends in with any contemporary or historical architecture. The body and frame is made from extruded or pressure cast marine grade aluminum, Oxsilan ® pre-treated, and powder coated to corrosion class C5-M marine grade. The front lens consists of impact resistant tempered glass with marine grade stainless steel and aluminum fixings. The scale and fan cover is made of durable material, including impact and UV resistant P6. This fixture also comes with pignose tilt locks and a scale with mark on yoke for easy installation. The pignose tilt locks can be locked in place using the included key, protecting your fixed installations from vandalism and theft.

LED Technology
The compact, rectangular i-2 White POI incorporates 69 high-power White LEDs, which delivers a bright and accurate beam projection for long-throws. Each individual lens in the i-2 White POI is related to White LED chips only. These optics have been designed to deliver an impressive amount of white light when illuminating structures over long distances, while performing at a very low power consumption. The LEDs expected lifetime is 50,000 hours.

Optics
The 69 individual lenses of the i-2 White POI luminaire deliver a native 8° narrow beam, providing impact at up to 75m/250ft distance, whereas, the wider optics allow for wider uniform coverage. Its standard beam can be modified with integral holographic filters, providing a further four standard options of either 18° or 40° degree wash  – or elliptical horizontal 60°/10° or elliptical vertical 10°/60°  flat-field even distribution.

Internal honeycomb
All i-2 POI versions are available with integral honeycomb louver, eliminating spill light and preventing direct insight to the LED.

Variants for specific needs
The i-series is comprised of a range of fixtures to fulfill any project requirement. While this i-2 White POI contains only White  LEDs, similar variants exist with only Red, only Green, only Blue, or even UV LEDs. Lastly, the i-2 RGBW POI contains Red, Green, Blue, and White LEDs. Click here for a quick overview of the i-2 POI series.

Durability
The IP66-rating of the i-2 White POI luminaire ensures that the fixture is kept free from externally induced particles and liquids on internal electronics, optics, and light sources, including acidic air pollution, making it ideally suited for near- and offshore areas with high salinity. The need to clean optics is eliminated and no internal corrosion will occur. Extensive testing ensures maximum durability to vibration and physical impact. Learn more about SGM's testing 

Dehumidification
The internal built-in dehumidifier protects this fixture from moisture, pollution, and any other factors that can generate corrosion. The patented SGM dehumidification, not only removes humidity, but also prevents oxidation and condensation, while a Gore-Tex ® membrane equalizes internal pressure to prevent leaks. POI products installed on permanent installations must always be powered on, so dehumidifiers perform properly. Learn more about dehumidification

Thermal management
This bright and accurate luminaire is optimized to manage heat in a very smart way. Like all SGM LED products, the i-2 White POI is tested under extreme hot and cold conditions to prevent any kind of failures in outdoor or indoor environments. Learn more about SGM thermal management

Mounting options
The universal i-2 White POI wash and flood light can be oriented in any position and comes with 2 x M10 fixing points and mounting bracket for bolting on the fixture. Standard accessories include half and full anti-glare shields easily fitted to remove insight to LEDs and unwanted discomfort glare and reflections. Additionally, M-10 bolts are included, which ensures the fixture can be tightly screwed to a surface, protecting it from both vandalism and theft. The M-10 bolts are suitable for any kind of custom-made bracket and are included with all POI fixtures. Omega POI style brackets are also available for additional mounting options. Being fully RDM compatible, the i-2 White is ideal for installation in non-accessible locations.

Control
The built-in Lumen Radio wireless DMX receiver enables the fixture to be operated both cabled and wireless. DMX/RDM is obtained through a 5m/16.4ft cable or via wireless. Power is connected through a 3 x 1½ mm2 pre-fitted 5m/16.4ft cable.To avoid operating a menu, this fixture comes with a magnet key. The magnet key can easily log off the fixture, which will force the fixture to automatically search for a new wireless transmitter. This user-friendly, wireless-setup makes it ideal for non-accessible locations, and as there are no external antennas visible, the fixture keeps its clean look, complimenting any historical or modern architectural structure.

Included SGM technologies

ThermalDrive^TM
This thermal management techonology provides Advaced Temperature Control monitored via sensors and software, keeping optimal LED junction temperatures, and ensuring maximum reliability for long-term use. The ThermalDrive^TM system includes cutting-edge heat removal via passive thermal tecniques and active forced-air cooling (depending on the product), specifically designed to maintain LED efficiency while extending fixture's lifetime.

DryTech^TM
SGM's integrated patented Dehumidification process eliminates humidity and breaks down corrosive molecules deriving from polluted air to avoid destructive corrosion. Inbuilt dehumidifiers constantly remove trapped hydrogen from inside of the lighting fixture in a solid estate electrolytic process with no moving parts. The DryTech^TM procedure is also based on a Ingress Protection rating of 65 or 66 (depending on the fixture), intended as a full protection against dust and other particles, while ensuring protection against direct water jets.