- IP65-rated RGB pixel 3D graphic LED tube
- 2 x 27 pixels per tube
- 2 x 130º viewing angle
- DMX control through TLD-612A / ILD
- 35mm pixel pitch
- 1-meter length per tube
- Practically maintenance-free
- Up to 81 controllable DMX channels
The LT-100 is a pixel tube designed to create immersive outdoor or indoor video and light installations. It is fully prepared for pixel mapping and media control. These transparent IP65-rated LED tubes have a wide viewing angle and can be used to create alluring 3D spatial effects. This makes them suitable for a wide range of applications, including touring, TV scenography, theme parks, exhibitions, video art, clubs, shopping malls, or just about any fixed or temporary installation.
Each LT-100 product contains 27 pixels in two 130º viewing angles. One tube mounts 2 x 27 RGB LEDs. To configure and control up to six LT-100s, it is recommendable to deploy either SGM’s TLD-612A or ILD driver. The LEDs expected lifetime is 50,000 hours.
The LT-100 can be operated by SGM’s TLD-612A or ILD drivers. An entire system can be controlled via DMX-512A, a dedicated video server, or an ordinary PC with ArtNet™ (the ArtNet signal is then distributed by a third party ArtNet to DMX Converter).
To setup the full configuration of the LT-100, SGM offers the ArtNet Configurator, which is an extremely powerful software. The ArtNet Configurator offers the possibility of configuring ArtNet and DMX-512A to fit the selected controlling system when using TLD-612A or ILD drivers with LT-100 units. This software is also compatible with the SGM A-4 ArtNet to DMX converter.
The durable IP65-rating of the LT-100 ensures that the units are kept free of externally induced particles and liquids, such as smoke fluid, dust, dirt, airborne pollution, and humidity. It is ideal for outdoor applications, while being practically maintenance-free makes it a sustainable and long-lasting choice for indoor events and installations as well.
This 3D LED graphic tube can be suspended from the ceiling, providing a staggering overhead 3D vertical and horizontal zip effect. However, it is not limited to a suspension mode, as it can be floor-mounted or integrated into a scenery in creative ways.
Up to six LT-100 input connectors can be directly wired to a TLD-612A or an ILD driver, and those can be hung with regular clamps or just be attached to a surface. Each LT-100 graphic tube has a maximum length of 1 meter. Since the LT-100 cable is 0.85m long and includes a top bracket, the tube can be hung in different positions. An optional LT mount is also available for a more accurate setup.
|LED expected lifetime||50,000 hours|
|Lightsource||27 x 2 RGB LEDs|
|Pixel pitch||35 mm|
|Light output all LEDs on||510 lm|
|Lumen per kilogram||1545 lm / Kg|
|Lens material||Standard lens, acryllic tube|
|Material||Acryllic and aluminium|
|Net dimensions||1006 x 27 mm|
|Net dimensions inches||39.6 x 1.1 inches|
|Net weight||0.33 kg (0.7 lbs)|
|Dimming||Smooth fade in, gamma corrected curve|
|View angle||2 x 130°|
|DC voltage, nominal||12 VDC|
|Max power consumption||20 W|
|Programming and Control|
|Data / Power input||Female locking 4-pin RS-765|
|Rigging possibilities||Top bracket for hanging|
|Safety features||Possibility for safety wire thru top bracket|
|Humidity (max.)||98 %|
|Temperature range, operating||-40°C to 50°C|
|Temperature range, start-up||-20°C to 50°C|
|Temperature range, storage||-40°C to 80°C|
|Total heat dissipation, max power||68.2 BTU per hour|
|Included items||User Manual|
|CE - 2014/30/EU: EMC Directive||EN 61547|
Certifications & classifications
|Product name||Item number|
|LT-100 IP - Led tube 1m (27 pixels)||80080015|
|LT·100/LT·200/LB-100 Extension Cable||83062063|