Battery-driven LED Wash Light

Housing colors
Black RAL 9004
White RAL 9010
Custom any RAL
Info shortcuts
  • Battery-driven IP65 RGBW LED light source
  • 10° (with 10° lens) native beam angle, adjustable via magnetic holographic filters
  • Up to 24 hours battery operation
  • DMX, RDM, and 100% wireless (power and control)
  • 2000K - 10000K CTC control
  • Ultra-high-speed strobe effect
  • Practically maintenance-free and silent performance
  • Flicker-free / Programmable scenes

The P-1 is a versatile RGBW wash with full wireless operation, designed to match the requirements of corporate productions, broadcast applications, wedding receptions, staging, and events. To further enhance its versatility, available unique magnetic holographic filters allow the P-1 to modify its beam angle depending on the application, while the onboard Lithium-Ion battery pack provides for extended run times without recharge, eliminating the need of cables or mains power. The P-1 is a smart, reliable, and powerful luminaire built in a compact, lightweight, and elegant assembly: an LED wash that sets a new standard for the most demanding users.

LED Technology
The P-1 luminaire employs 8 high-power 12.5W RGBW LEDs, divided into two vertical, individually controllable segments. The P-1 includes 2000K - 10000K CTC color temperature control, with 16bit control over dimming and RGBW pixels. A powerful shutter and accurate color calibration provides the means for the P-1 to match the same colors available in the fixtures from the P, Q, and i series. The LEDs expected lifetime is 50,000 hours.

Battery and wired operation
As a 100% wireless wash light, the P-1 offers a vast array of options for setups. However, the P-1 may also be wired, with or without batteries. The battery capacity of the P-1 is configurable up to 24 hours, and it only requires 3.5 hours to be recharged to 75%. The battery status may be monitored remotely via RDM or via the built-in OLED display. When connected to mains power, the P-1 only requires 70W.

Magnetic holographic filters
The P-1 can be operated as a powerful 10º wash natively, but also as a flexible luminaire through the use of available optional low-loss holographic filters. With this magnetic set of spread angle filters, it is possible to modify the aperture of the beam angle to achieve a seamless medium spread of 19º, a powerful wide diffusion at 45º, or a versatile elliptical effect in horizontal (63º/12º) or vertical (12º/63º). An empty magnetic frame is also available for the usage of custom color filters or diffusers.

Set, theatrical, and studio features
The P-1 was originally conceived as a theatre set and studio luminaire. This silent running wash fixture does not require active ventilation due to its passive cooling facilities. It is a very powerful fixture for low-noise environments. The P-1 base includes rubber feet, enabling it to be placed on delicate floor surfaces without special care. Finally, the P-1 may be ordered with optional easy-fit 4-way or 8-way barndoors to eliminate undesired light bleed in theatres or studios.

Pixel mapping
Two individually controllable LED segments are incorporated into the P-1. The DMX selection allows users to control the Red, Green, Blue, and White LEDs for each vertical segment, both in 8bit and 16bit modes. This is a very interesting feature, providing the ability to operate the P-1 as a "direct view" fixture for pixel mapping special effects design and programming. 

IP rating
The durable IP65-rating of the P-1 luminaire ensures that the fixture is kept free from externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. It is ideal for outdoor applications, while being practically maintenance-free, makes it a sustainable and long-lasting choice for both outdoor as well as indoor events and installations.

The internal built-in dehumidifier protects this fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks. Learn more about dehumidification

Thermal management
 To achieve optimum performance of the LEDs at all times, this bright and accurate luminaire is optimized to manage heat impact through SGM’s unique thermal management technology. The technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. Additionally, the special aluminum alloy and surface treatment ensures maximum heat dispersion while the fan-assisted cooling ensures optimal performance at any time and under any conditions (such as variable temperatures, limited airflows, confined installation spaces, etc.). Like all SGM LED products, the P-1 consists of SGM’s superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters. Learn more about SGM thermal management

Mounting options
The P-1 may be ordered with or without batteries for use in wired mode. The battery pack may be ordered separately and added later when the need arises. In any case, the P-1 can be mounted onto the ceiling, in a rig, or in a wall-mount. The unit includes one omega bracket with two 1/4 turn locking points. Optional barndoors and magnetic filters are available. The P-1 is Kensington lock compatible and there is an optional anti-theft protection available for long-term installations.


Included SGM technologies

This thermal management techonology provides Advaced Temperature Control monitored via sensors and software, keeping optimal LED junction temperatures, and ensuring maximum reliability for long-term use. The ThermalDriveTM system includes cutting-edge heat removal via passive thermal tecniques and active forced-air cooling (depending on the product), specifically designed to maintain LED efficiency while extending fixture's lifetime.

SGM uses Full Range Calibration in all LED fixtures over CIE space and black body curve, measured via spectrometer and SGM Illumination Lab software. To provide the best user experience, SGM's Color Match procedure ensures accurate wavelength reproduction within the product range via colored LEDs, dichroic filters, or CMY mixing (depending on the product); all of them specified to match the SGM color palette.


Optical Data
LED expected lifetime 50,000 hours
Lightsource 8 x high-power 12.5W RGBW LEDs
Native lens options 10°
Optional filters Elliptical horizontal, I/P, external (10° x 60° angle)
Elliptical vertical, I/P, external (60° x 10° angle)
Wide, P-1/P-6/P-10, external (47° angle)
Medium, P-1/P-6/P-10, external (18° angle)
Average CRI (CTC) 80
Color temperature range 2000K - 10000K
Efficacy 33 lm/W
Light output all LEDs on 3073 lm
Light output blue 316 lm
Light output green 1018 lm
Light output red 544 lm
Lux @ 10m 514 lux
Lux @ 3m 5709 lux
Lux @ 5m 2055 lux
Native beam angle(s) 10° (with 10° lens)
19° (with Med filter frame)
45° (with Wide filter frame)
Native field angle(s) 22°
Color options Black - RAL 9004
Custom color - Any RAL
White - RAL 9010
Effective Projected Area 0.85 Square ft
IP class IP65
Lens material Tempered glass front
Material Aluminium
Net dimensions 334 x 254.6 x 119 mm
Net dimensions inches 13.2 x 10 x 4.7 inches
Net weight 5.7 kg (12.6 lbs)
Net weight excluding batteries 5 kg
Net weight excluding batteries lbs 11
Anti Theft Protection Kensington Lock
Anti-Theft protection with movement sensor (Optional)
Color calibration SGM proprietary, full color calibration
Dehumidifier Base / Head
Dimming 2 Smooth fade in, display selectable curves: gamma corrected, and linear
Emulation mode / effect Built-in color presets, display selectable
Filters Magnetic easy-fit spread angle filter frames
LED panel 2 individually controllable segments
Strobe Ultra-high-speed strobe effects
Pixel strobe feature (up to 2 segments)
Tilt 0 - 190°
Electrical protection Overload protection with automatic recover
Input voltage, absolute max. rating 90 - 264 VAC; 50 / 60 Hz
Input voltage, nominal 100 - 240 VAC; 50 / 60 Hz
Max inrush current 230VAC 60 A
Max power consumption 90 W
Power Supply Unit High-efficiency electronic switch-mode
Standby power consumption 3 W
Programming and Control
16-bit control Dimmer, Red, Green, Blue, White
Cabled DMX 5 pin XLR input/output
DMX channels 3, 4, 6, 9, 11 or 16
DMX modes 6
Protocol CRMX, W-DMX™ G2, W-DMX™ G3, W-DMX™ G4, W-DMX™ G4S
Wireless RDM
Setting and addressing OLED graphical display / 4 buttons
Standalone mode
Standalone mode Quick Color
3 programs with up to 24 scenes
Wireless DMX Lumen Radio with RDM
DMX data in/out IP65 XLR 5-pin connector, Female
IP65 XLR 5-pin connector, Male
Power Power input connector
Mounting point 2 quarter-turn locking points for one Omega bracket
Orientation Any
Rigging possibilities Hanging (Omega Bracket included) or ceiling/wall mount (optional)
Safety features Bottom mount for safety wire
Minimum distance to combustible materials: 0.3 meter (11 in).
Cooling Passive
Humidity (max.) 98 %
Temperature range, battery operating -20°C to 50°C
Temperature range, battey Start-up -20°C to 50°C
Temperature range, charging 10°C to 45°C
Temperature range, operating 0°C to 45°C
Temperature range, start-up 0°C to 45°C
Temperature range, storage -20°C to 25°C
Thermal protection Automatic overtemperature protection
Total heat dissipation, max power 307.1 BTU per hour
Total heat dissipation, standby 10.2 BTU per hour
Included items
Included items 2 m IP66 power cable pigtail
1 Omega bracket with quarter-turn fasteners
Safety instructions and installation quick guide
Battery capacity Configurable up to 24 hours
Battery capacity (typical use) 10 - 12
Battery charge time up to 100% 6.5 hours
Battery charge time up to 75% 3.5 hours
Battery option YES
Battery status Battery level indicator
Battery type Lithium-Ion battery
Durability > 1000 cycles
Conforms To
CE - 2014/30/EU: EMC Directive EN 55103-1
EN 55103-2
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
CE - 2014/35/EU: Low Voltage Directive EN 60598-1
EN 60598-2-17
EN 62471
EN 60529
RoHS2 Directive 2011/65/EU

Certifications & classifications


Ordering information

Product name Item number
P-1, Std, BL, w/batteries 80031501
P-1, Std, WH, w/batteries 80031511
P-1, Std, CU, (incl. Batt) 80031521
Accessories Item number
Omega Bracket with 1/4-turn fasteners 83060602
P·1 Ceiling / Wall Mount 83060614
4-way Barndoors for P·1 83061138
8-way Barndoors for P·1 83061139
Filter frame for P·1 - medium angle 83061140
Filter frame for P·1 - wide angle 83061141
Filter frame for P·1 - elliptical horizontal wide angle 83061142
Filter frame for P·1 - elliptical vertical wide angle 83061147
Flight Case for 4 pcs of P·1 82051009
Flight Case for 4 pcs of P·1 incl. charger 82051010
Battery, Nominal: 21.6 V - Nominal: 3350 mAh 83061709
Battery, Nominal: 21.6V - Nominal: 3350 mAh (2 pcs) 83061710
Flight Case charger cable assembly kit (4 pcs) 83062044
Power cable with IP connector 07860275
SGM USB uploader cable 83062011
Vacuum Test Kit 83061136
A·4 80070217
RDM Addressing Tool
Spigot adapter for omega bracket 83060639

See more Wash / Flood / Strobe

View all

Let's work together!

We have lighting experts all around the world

Explore the SGM network

Stage Lighting

Experience the SGM lighting technology 

SGM Light is specialized in stage lighting you can trust, by developing best in class stage luminaires with an optimal return on investment. Our technology focuses on flexibility, efficiency, and versatility, building tools for an industry where high quality, reliability, and innovation are some of the most important features. At SGM, we thrive to push the limits within the world of stage lighting to create the solutions that artists, lighting designers, rental companies and audiences are really looking for. 


Explore the different SGM luminaires for the entertainment industry 

Our extensive range of entertainment lighting include products such as moving heads, washes, strobes, blinders, flood lights, and effect lighting. This multi-purpose wide range of SGM luminaires is designed to tailor the lighting setup up to your needs, from high-output beams to high-CRI and high-TLCI fixtures. SGM Light is represented in many countries worldwide, and our products are used globally at all types of stage events and venues, including concerts, theatre productions, films, exhibitions, theme parks, and art installations.

Since 2010, all SGM LED products are powered by our proprietary TruColor™ algorithms, ensuring an homogeneous color mixing performance across the entire portfolio, while offering full compatibility between SGM’s RGB-based fixtures and filter-based White LED fixtures.

Our unique development process 

All SGM stage lights undergo rigorous testing and development, ensuring top-of-the-line LED fixtures that provide superior performance. We implement high quality standards for light output, color consistency, thermal management, and weatherproof resistance, to guarantee an extreme durability, excellent performance, and almost no maintenance. This way we can increase the ROI of SGM users, while offering a powerful all-weather lighting portfolio.

A great example of this is the SGM G-7 Spot LED Moving Head, with IP-66 rating and active dehumidification. It is extremely durable in all sorts of conditions, with electronics and optics protected by SGM’s exclusive DryTech™ system and a robust design. Our advanced technology ensures the interior of the fixture is preserved from external elements like water, dust, dirt, mud, sand, airborne pollution, extreme temperatures, and humidity, all of them very common at events or music festivals. Even though the G-7 Spot is perfect for touring and other outdoor events, these unique features also make it suitable for indoor installations and events, where long lifespan and low maintenance are must-haves.

Ultimate stage light testing

To be able to guarantee the durability and the best performance possible, all SGM stage lights are pushed to the limits in different ways. We lock up the fixtures in a salt chamber, we sandblast the lenses, we apply high-pressure washers over them, and we test them in very high and low temperatures. Sometimes, we even encase the fixtures in a block of ice before smashing it with a sledgehammer. It is literally a torture, but we are really focused on building fixtures that rental companies can rely on.

Products such as the SGM P-6 LED Wash or the SGM Q-8 DualSource™ LED Strobe Flood, are specifically designed and tested for continued rental use in all-weather environments. These rock-solid IP66 rated fixtures include an integrated dehumidifier, a sealed IP67 wet base, and our next-gen ThermalDrive™ cooling system. This is the result of 10+ years of experience in weatherproof and long-lasting LED technology.

Professional support and continuous improvement

At SGM 24/7 technical support is key when it comes to all our partners. We know the importance of a fast and efficient after-sales service, and we believe your feedback makes us better; that is why we see technical support as our top priority. Supporting our users is always a great chance to learn from them. Based on these inputs, we deliver continued firmware improvements to your existing SGM fixtures, so they can keep their value over the years. SGM is always ready to listen, so please tell us what you need; we will evaluate all engineering possibilities for enhancing and optimizing the performance of our products.

Be inspired by SGM stage lighting solutions

For inspiration on what our different lighting solutions can be used for, please visit our Project page, where you can read about previous light shows and installations featuring our bright and powerful fixtures.

Learn more about our different stage lighting product series

You can learn more about our different types of stage lighting luminaires under each product page. Here you will find detailed product specifications, allowing you to easily choose the perfect LED solution to wow your audience.