- LED driver for LB-100, LT-100, and LT-200
- Ethernet RJ45 ArtNet interface
- Power in
- W maximum power consumption
- Small physical footprint
- Full control via SGM ArtNet Configurator software
- Robust design incl. brackets
The ILD, Installation LED Driver, has a small and compact power supply, which makes it suitable for permanent installations, where a small physical footprint is required. The ILD is capable of driving either six SGM LT-100, three SGM LT-200 or three full-length SGM LB-100 pixel luminaires. The output of the ILD is completely configurable via software, making it possible to send any channel range in any universe to each pixel. The ArtNet interface is especially designed for high-speed / high-flow DMX, making it a perfect tool for pixel mapping.
The ILD includes six locking 4-pin outputs for wiring LB or LT products, and two RJ45 connectors for ArtNet. The housing of the ILD is extremely rugged, and, with its IP65-rating, it is designed for any kind of indoor or outdoor production. The ILD weighs kg and the dimensions are 258 x 116 x 65 mm (L x W x H).
The ILD is able to drive six SGM LT-100s, three SGM LT-200, or three full-length SGM LB-100 pixel luminaires (equal to 24 strings). These can be attached in any arrangement to the six connectors on the ILD.
The ILD is also IP65-rated and has daisy-chainable Ethernet for ArtNet input, and it has a max power consumption of just W. Up to five ILDs can be configured and controlled when daisy-chained together and connected to a computer using an Ethernet cable, and up to five ILD’s per port can be daisy-chained when one or more Ethernet switches are used.
Configuration and control
The ILD can be configured using the SGM ArtNet Configurator and controlled using a lighting controller or computer-based ArtNet controller.
Three types of brackets are included in the ILD as standard to allow multiple rigging options: T-Bolt, M-10 locknut for permanent installations, and a regular bracket for clamp.
|Net dimensions inches||10.2 x 2.6 x 4.6 inches|
|Input voltage, absolute max. rating||90 - 264 VAC; 50 / 60 Hz|
|Input voltage, nominal||100 - 240 VAC; 50 / 60 Hz|
|Max inrush current 230VAC||40 A|
|Max power consumption||150 W|
|Power factor||0.99 PF (230 V)|
|Power Supply Unit||Auto-ranging electronic switch-mode|
|Standby power consumption||5 W|
|Programming and Control|
|Compatible operating system||Windows Vista|
|Art-Net data Input||RJ45 connectors|
|Driver data output||Locking 4-pin RJ765 sockets|
|Power||Power cable 1 meter with bare ends (permanently wired)|
|Signal source||Artistic License Art-Net 3|
|Rigging possibilities||Hanging / horizontal mounted|
|Humidity (max.)||98 %|
|Total heat dissipation, max power||511.8 BTU per hour|
|Total heat dissipation, standby||17.1 BTU per hour|
|Included items||Horizontal M-10 bracket|
|ILD Touring bracket|
|6 Output connector caps|
|2 RJ45 IP plug|
|1 Ethernet connector cap|
|CE - 2014/30/EU: EMC Directive||EN 55103-1|
|CE - 2014/35/EU: Low Voltage Directive||EN 60598-1|
Data Connection Diagrams
User Manual and Specifications
Certifications & classifications
|Mounting horizontal bracket for A·4 & ILD||17000099|
|LT·100/LT·200/LB-100 Extension Cable||83062063|