Q·7 POI

Construction
The Q-7 RGBW POI is an ultra-compact form-follows-function luminaire designed and manufactured in Denmark. The body and frame is powder coated to corrosion class C5-M marine grade and blends in with any contemporary or historical architecture.The scale and fan cover is made of durable material, including impact and UV resistant P6. This fixture also comes with pignose tilt locks and a scale with mark on yoke for easy installation. The pignose tilt locks can be locked in place using the included key, protecting your fixed installations from vandalism and theft.

LED Technology
The compact, rectangular, and full color Q-7 RGBW POI incorporates 2,000 high-power RGBW LEDs, delivering wide-angle projections at stunning 25163 verified lumens as maximum output. In pure white LEDs, the Q-7 delivers no less than lumen in . However, one of the big advantages of the Q-7 POI is the impressive brightness in colors. It outputs 3193 lumens in Red, 6948 lumens in Green, and 1256 lumens in Blue, which is a huge amount of light for only 450W. The LEDs expected lifetime is 50,000 hours.

Colors
SGM flood lights are designed to achieve both deep reds and warm pastels as well as blue saturates, bright magentas, and soft turquoises. Additionally, it delivers a linear colour temperature control from 2000K - 10000K and best-in-class optical color mixing, with the same accurate color calibration as the entire SGM flood light range, avoiding color shifts.

Durability
The IP66-rating of the Q-7 RGBW POI luminaire ensures that the fixture is kept free from externally induced particles and liquids on internal electronics, optics, and light sources, including acidic air pollution, making it ideally suited for near- and offshore areas with high salinity. The need to clean optics is eliminated and no internal corrosion will occur. Extensive testing ensures maximum durability to vibration and physical impact. Learn more about SGM's testing 

Dehumidification
The internal built-in dehumidifier protects this fixture from moisture, pollution, and any other factors that can generate corrosion. The patented SGM dehumidification, not only removes humidity, but also prevents oxidation and condensation, while a Gore-Tex ® membrane equalizes internal pressure to prevent leaks. POI products installed on permanent installations must always be powered on, so dehumidifiers perform properly. Learn more about dehumidification

Thermal management
This bright and accurate luminaire is optimized to manage the heat in a very smart way. Like all SGM LED products, the Q-7 RGBW POI is tested under extreme hot and cold conditions to prevent any kind of failures in outdoor or indoor environments. Learn more about SGM thermal management

Mounting options
The universal Q-7 RGBW POI wash and flood light can be oriented in any position. Standard accessories include half and full anti-glare shields, easily fitted to remove insight to LEDs and unwanted discomfort glare and reflections. Additionally, M-10 bolts are included, which ensures the fixture can be tightly screwed to a surface, protecting it from both vandalism and theft. The M-10 bolts are suitable for any kind of custom-made bracket and are included with all POI fixtures. Omega POI style brackets are also available for additional mounting options. Being fully RDM compatible, the Q-7 RGBW is ideal for installation in non-accessible locations.

Control
DMX/RDM is obtained through a 5m/16.4ft cable. Power is connected through a 3 x 1½ mm2 pre-fitted 5m/16.4ft cable.

Included SGM technologies

ThermalDrive^TM
This thermal management techonology provides Advaced Temperature Control monitored via sensors and software, keeping optimal LED junction temperatures, and ensuring maximum reliability for long-term use. The ThermalDrive^TM system includes cutting-edge heat removal via passive thermal tecniques and active forced-air cooling (depending on the product), specifically designed to maintain LED efficiency while extending fixture's lifetime.

TruColor^TM
SGM uses Full Range Calibration in all LED fixtures over CIE space and black body curve, measured via spectrometer and SGM Illumination Lab software. To provide the best user experience, SGM's Color Match procedure ensures accurate wavelength reproduction within the product range via colored LEDs, dichroic filters, or CMY mixing (depending on the product); all of them specified to match the SGM color palette.

DryTech^TM
SGM's integrated patented Dehumidification process eliminates humidity and breaks down corrosive molecules deriving from polluted air to avoid destructive corrosion. Inbuilt dehumidifiers constantly remove trapped hydrogen from inside of the lighting fixture in a solid estate electrolytic process with no moving parts. The DryTech^TM procedure is also based on a Ingress Protection rating of 65 or 66 (depending on the fixture), intended as a full protection against dust and other particles, while ensuring protection against direct water jets.